How to calculate food cost
Food cost starts with one ingredient line. Divide what you paid by how much you bought to get the price of one unit, multiply by how much the recipe uses, then divide by the yield to pay for what you trimmed away:
Ingredient cost = price paid ÷ amount bought × amount used ÷ yield
Add every line and you have the recipe cost; divide it by the portions it makes and you have the plate cost. Then two more formulas do the pricing:
Food cost % = plate cost ÷ menu price × 100
Menu price = plate cost ÷ target food cost %
A worked example: one margherita pizza
- Fresh mozzarella at $6.99 a pound, 4 oz on the pizza: $6.99 ÷ 16 oz × 4 oz = $1.75.
- A dough ball from a case of 24 at $26.40: $26.40 ÷ 24 = $1.10.
- Basil at $2.49 for 2 oz, 0.1 oz used, with 80% usable after picking the leaves: $2.49 ÷ 2 × 0.1 ÷ 0.80 = $0.16.
- Crushed tomatoes and a tablespoon of olive oil add $0.16 and $0.18.
The pizza costs $3.34 to make. At a 30% target, $3.34 ÷ 0.30 = $11.13, which you might round up to $11.95. At $11.95 the food cost is 27.9%, and each pizza leaves $8.61 of gross profit to pay for labor, rent and everything else. Load the margherita pizza in the calculator above to see every line.
What is a good food cost percentage?
There is no single right number, because it depends on your concept, your prices and what you spend on labor and rent. These ranges are rules of thumb, not targets to copy:
- Most full-service restaurants land somewhere around 28 to 35%.
- Pizza, pasta and quick service often run lower, around 25 to 30%, because flour, rice and pasta are cheap.
- Steakhouses and seafood can run 35 to 40% or more and still do well, because an expensive plate brings in more dollars per sale.
- Coffee drinks are often 15 to 25%, before the cup and lid.
The percentage matters less than whether it is steady. If yours creeps up from 29% to 33% with the same menu, something changed: a supplier price, a portion size, or waste.
Plate cost, food cost percentage and period food cost
Three numbers go by the name food cost, and they answer different questions:
- Plate cost is what one portion costs you in ingredients, in money. It is what this calculator works out.
- A dish's food cost percentage is that plate cost as a share of its menu price. It tells you whether one item is priced right.
- Period food cost percentage is what the whole kitchen used over a week or a month, as a share of food sales: (beginning inventory + purchases − ending inventory) ÷ food sales.
For example, $8,000 of food on the shelves at the start of the month, $12,000 bought and $7,500 left at the end means $12,500 was used. Against $40,000 of food sales, that is a 31.3% period food cost. If your recipes say the menu should run at 28%, the gap is waste, over-portioning, comps, theft or prices that went up since you last costed.
Yield and waste
You pay for the whole onion but serve only part of it. Yield is the part you can use, as a percentage of what you bought: weigh an ingredient as it arrives, trim it the way your kitchen does, and weigh it again.
Yield % = usable weight ÷ weight bought × 100
A bottle of oil is close to 100%. Onions are often around 90% once peeled, a head of lettuce around 75%, and a whole fish can be 50% or less once filleted. Leaving yield out makes trimmed produce and proteins look cheaper than they are, which is how a menu ends up underpriced. If you portion cooked meat, its cooking loss belongs in the yield too.
How to price a menu item
The target food cost method divides the plate cost by your target percentage, as the calculator does. It is quick and keeps every dish in line, but it can price cheap dishes too low and expensive ones too high.
The contribution margin method starts from the gross profit a plate has to make. If every plate needs to bring in $8 toward labor and overhead, a $3 pasta sells for $11 and a $9 steak for $17. The pasta then runs at 27% and the steak at 53%, and each still earns its $8. Many restaurants use both: a target percentage as a check, and margin in dollars for the plates that sell most.
Then look at the result as a guest would. Compare it with places nearby, round to a price that reads well, and type your actual menu price into the calculator to see the food cost and gross profit it really gives you.
How often to recost your recipes
Recost a dish whenever you change its recipe or portion, and whenever a supplier changes the price of something it uses a lot of. Proteins, dairy, coffee and oil move fastest, so check the dishes built on them every month. Seasonal produce can swing within weeks. Go through the whole menu at least every quarter, and before you print new menus. Your recipe stays in this browser, so you can come back and change one price at a time.
What a loyalty reward really costs
A reward looks expensive on the menu and cheap on the plate. Free tacos sell for $7.95 but cost about $2.22 to make. Give them after six visits with a $20 average check, and the reward costs under 2% of the $120 the regular spent to earn it, far less than most discounts. The reward box above works this out for any dish. See how a loyalty program for restaurants puts it on a card your customers keep in their phone.
More free tools for restaurants
- Punch card maker: Design a free printable punch card with your name, logo, colors and stamps, ten to a sheet with cut marks. No sign-up and no watermark.
- Stamp card maker: Make a free printable stamp card with your logo, colors and reward, ten to a sheet, with boxes sized for a rubber stamp. No sign-up, no watermark.
- Gift certificate maker: Make free printable gift certificates with your logo, amount and expiry date, numbered and three to a page. No sign-up and no watermark.
- Coupon maker: Make free printable coupons for your business, with your offer, logo, code and expiry date, eight to a page with cut marks. No sign-up, no watermark.
- Table tent maker: Make a free printable table tent for your restaurant or café, with a QR code for your menu, reviews, Wi-Fi or rewards. Two per page. No sign-up.
Print your own stamp cards and table tents, or see all the free tools.